Why Use The VDW 480 Frost Resistant Drainage Mortar?
The VDW 480 Frost Resistant Drainage Mortar offers exceptional features for your paving needs. It excels as a permeable bedding system, providing both frost resistance and robust structural support for your paving stones. Trust in VDW 480 for durability and a reliable foundation that stands up to the elements
Water Permeable
Our Mortar bedding is permeable, making it ideal for use in areas exposed to extreme moisture or water, such as swimming pools, fountains, and water tanks. This type of mortar is highly durable and can withstand harsh conditions, including extreme temperatures, rain, and snow.
Strength
Trass bed VDW 480 Mortar has excellent strength properties, making it suitable for heavy-duty applications such as driveways that bear more weight than a standard patio. Our mixture is optimized to last a long time without requiring constant maintenance.
Cost-Effective
Trass bedding mortar is known to be cost-effective even though it might be slightly more expensive than other types of mortar, such as traditional cement. While the initial investment might be more significant, it will pay off in the long run as our mortar bedding doesn’t require as much costly maintenance and repair. In addition, the improved workability of our mortar bedding means it can save money on labor costs because of the quick application.
Eco-friendly
The Trass is a volcanic tuff used in the production of mortar and is a natural material that is mined from the earth. The Trass is a renewable resource that is more sustainable than many other building products that are derived from non-renewable sources. Trass VDW 480 mortar bedding is also considered a great eco-friendly material.
Technical Product Data
| Product Size | Comes in a 55 lb bag |
| Application Time | Approx. 1 hour at 20°C | 68°F* application temp. *Quick hardening at higher temperatures, and slow hardening at lower temperatures. |
| Compressive Strength | 2900 – 5500 psi at 3 and 28 days (dependent on filler material and mixing ratio) |
| Material Requirement | Clean 1/8″ – 3/8″ crushed aggregate mixed at 1:4 ratio 1 part Xtreme Bedding Compound to 4 parts aggregate (approx. 220 lbs. aggregate per each 55 lb. bag of bedding compound) *Mixing ratio of 1:6 is possible and suitable for light pedestrian loads |
| Water Addition Approximation | 11 liters | 2.9 gal. of cool, clean water per 25 kg | 55 lb. bag of mortar mixture |
| Application Temp. | 5-25°C | 41-77°F (Do not lay onto frozen ground.) |
| Flexural Strength | Approx. 1015 psi |
| Ingredients | Cement according to EN 197, Trass according to DIN 51043, and special additives |
| Storage Life | 1 year if stored unopened in sealed and undamaged packaging. Must also be kept dry and frost-free. |
Recommended Mixing Tool:
The TMX 1000 & 1500
The Collomix TMX 1000 & 1500 are compact, powerful automatic mixers specially designed for pre-bagged, heavy materials.
Three precisely angled arms spin at a low rotation to thoroughly mix up to three bags of heavy materials. Let the TMX mixers mix so you can be productive on the job site.
Application Instructions for Xtreme Bedding Compound VDW 480
1
Construction Site Requirements
- The subsurface must be made load bearing, firm and water permeable.
- Ensure drainage through permeable subsoil or a sufficient drainage gradient. Water impermeable load distribution layers, such as areas with house utility connections or any slab coverings that are laid, need to have a slope of at least 1.5–3.0%.
- In case of any watertight outdoor areas and levels where water flows or partial puddles form, it is recommended to install a suitable capillary- breaking drainage mat. Ambient and substrate temperature should be 41-77°F, and the process should be carried out in dry weather.
2
Recommended Mixing Ratio
- 1 volume part Xtreme Bedding Compound
- 4 volume parts suitable aggregate (i.e. 1/8″ – 3/8″ clean crushed or rolled grit/gravel)
- 11 liters | 2.9 gal cool, clean water per 25 kg | 55 lb. bedding compound – make note of wet/damp aggregate and reduce water consumption accordingly
3
Mixing
- Using a compulsory mixer or gravity mixer, mix the Xtreme Bedding Compound in a ratio of 1:4 with suitable aggregate and water, and mix so that it becomes earth-moist; total mixing time 4–5 minutes.
- First add the aggregate and approx. 75% of the water to the mixer, followed by the Xtreme Bedding Compound. Little-by-little, continue to add the remaining water to the mixture until the mortar is slightly shiny and can be formed into a loose ball. For smaller batches, mixing can be completed in a wheelbarrow or mortar tub – these methods may require a longer mixing time to achieve a homogeneous mortar.
- After mixing, the mortar is ready for immediate use. It is recommended to use the entire bag of bedding compound when possible, but for smaller batches precise quantities should be weighed out.
- Expect approx. 2.5 – 2.7 ft3 of coverage per unit mixed at a 1:4 ratio.
4
Application
- Apply the mixed bedding mortar manually in layers of minimum 1.5″ and maximum 4″ thickness. In the case of pavers or stones that are uniform in thickness, the bedding mortar can be leveled to the required layer thickness using screed bars.
- The underside of paving units need to be pre-treated with our Xtreme Adhesion Elutriant (vdw 495) and set at the correct height before hammering into place with a rubber mallet or dead-blow hammer. The joint area must be water-permeable and therefore also free of Xtreme Adhesion Elutriant universal bonding bridge.
- Post-treatment: The bedding mortar must be protected from drying out too quickly, and therefore avoiding excessive heat. The surface should also be covered in the event of adverse weather, such as sustained rainfall.
5
Important Information
- The surface can be walked on after 24 hours, or after the mortar has hardened. Grouting can also be carried out at this time.
- Full resilience will be reached after 7 days, but vehicular areas should not be opened to traffic until the grout has also sufficiently cured – please refer to the data sheet of the grout used for this information.
GFTK Consumption Calculator
Use This GFTK calculator to find out how much product you need!
Please Note For The Calculator:
Calculations will only occur if all fields are filled in correctly.
Please ensure that a 0. is listed where the dimensions are under an inch.
For The Xtreme Elutriant:
Coverage is approximately 75 sq ft per bag of VDW 495.
Please View This PDF for Additional Information